Can the glass background wall be directly pasted on the cement? How to decorate the dining room mirror background wall? Let me share with you.
Glass is air-proof, light-transmitting and stable in performance. Various types of glass have different characteristics due to different use occasions, and have a wide range of applications. When we select glass, we should not only pay attention to the price, but also understand its types and properties, so as to find more suitable materials. We collected data and compiled this article to help you understand the decoration method of glass background wall.
(1) Can the glass background wall be directly pasted on cement?
Background wall glass of restaurant can be pasted directly if the cement wall is smooth.
1. The glass of cement wall mainly depends on the neutral silicone structural adhesive. If the smoothness are good, the neutral silicone structural adhesive can be positioned and pasted with a thick double-sided adhesive (temporary fixing effect).
2. If the flatness is not good, it needs to be leveled with keel and then pasted.
Notes:
Background wall glass is usually spray-painted glass or mercury mirror glass, the back structure needs moisture-proof treatment to avoid wall moisture and moisture. It is recommended to use keel skeleton or density board to raise the wall, and add a waterproof coating or directly lay a plastic cloth between keel skeleton or joinery board and wall.
In addition, the glue used must be neutral glue, and acid glue should not be used. Acidic glue will corrode the paint or mercury layer, causing the glass surface to change into flowers and lose decorative effect.
not only for colored mirror,but also for antique mirror glass.we should remember use the neutral silicone structural adhesive.
(2) How to use antique mirror glass Decorate the Background Wall of the Restaurant
1. The walls should be flat, such as cement wall, gypsum board wall, putty wall, paint wall, woodworking board wall, even flat tiles or glass can be pasted;
2. Firstly, according to the drawings, put them together on the ground once, and then start putting them on the wall.
3. Apply a few pieces of neutral glass glue on the back of each antique mirror glass (don't coat them all) and a few pieces of cotton double-sided glue on the back. Then paste them on the wall. One piece of glass glue can be pasted 1-2 square meters.
4. Comparing with the mosaic drawings provided by us and the order that we have assembled on the ground, we should start to paste on the wall. We should pay attention to the gap between each piece is 0.5-1MM (leaving a little gap to prevent the gap caused by thermal expansion and cold contraction later), the order is from bottom to top.
5. After pasting it, it will dry thoroughly in 48 hours. The effect of the neutral silicone structural adhesive on the antique mirror glass is very firm and stronger than the effect of cement.
Welcome to enquire
Allen@antiquemirror.cn Cell:0086-13750360233(Whatsapp&Wechat) ,We manufacture and supply antique mirror glass,colored mirror ,pattern glass,silver mirror, copper-free mirror.