Matters need attentions for cutting glass with Glass Knife
2018-12-24 10:10
admin
Glass knife can be divided into diamond glass knife and alloy roller glass knife. It is suitable for cutting flat glass with thickness of 1-8 mm. It is an indispensable glass cutting tool for decoration and building materials industry.
1. Cut 2-3 mm thick flat glass with glass knife: Cut 2-3 mm thick flat glass with 2 mm*12 mm thin wood bar ruler. Measure the size of glass first and determine the cutting size on the ruler. Consider leaving 3 mm gap and 2 mm cutting edge. When cutting, one side with size should be close to one side of the glass and the other side of the ruler. Grasp the straight back of the blade, and no light or heavy bending.
2. Cutting 4-6mm thick glass with a glass knife: Cutting 4-6mm thick glass is roughly the same as above, but because the glass is thicker, it should be grasped accurately and stably, and the force should be light and even. Another cutting method is to use 4mm*50mm ruler, glass knife close to the ruler cutting, when we are cutting, to brush some kerosene on the cutting edge in advance, so that the cutting edge is easy to pull off after oil seepage.
3. Cutting large glass 5-6mm thick with glass knife: Cutting large glass 5-6mm thick is the same as cutting with 5mm*40mm ruler, but large glass area is large, people can not cut on the ground, sometimes need to stand on the glass to cut, before cutting, must be lined with velvet cloth on the worktable, so that the glass is evenly pressed, after cutting, both hands grasp the required glass, and at the same time take off the downward board, can not be careless. Meaning, causing the whole glass to break.
By the way, We manufacture antique mirror glass with the thickness from 3mm to 8mm. The attention of cutting antique mirror glass is the same as the normal flat glass.
4. Cutting Wired glass with glass knife: The method of cutting clamp glass is the same as that of 5-6 mm flat glass, but the cutting surface of the clamp glass is uneven, and the cutting edge is easy to slip and difficult to grasp. Therefore, it is necessary to recognize the knife edge, hold the knife head firmly, exert more force than ordinary glass, and speed faster, so that the bending will not occur. After cutting, both hands grasp the glass and pull down forcefully. The clamp wire can be pulled off. Then the clamp wire can be cut down with pliers to avoid cutting the palm when carrying.
5. Cutting pattern glass with glass knife: Cutting pattern glass with glass knife, pattern glass surface should be downward, and cutting method is the same as that of filament glass.
6. Cutting Frosted Glass with Glass Knife: Cutting Frosted Glass with Glass Knife, the surface should be downward, and the cutting method is the same as that of flat glass.
1. Cut 2-3 mm thick flat glass with glass knife: Cut 2-3 mm thick flat glass with 2 mm*12 mm thin wood bar ruler. Measure the size of glass first and determine the cutting size on the ruler. Consider leaving 3 mm gap and 2 mm cutting edge. When cutting, one side with size should be close to one side of the glass and the other side of the ruler. Grasp the straight back of the blade, and no light or heavy bending.
2. Cutting 4-6mm thick glass with a glass knife: Cutting 4-6mm thick glass is roughly the same as above, but because the glass is thicker, it should be grasped accurately and stably, and the force should be light and even. Another cutting method is to use 4mm*50mm ruler, glass knife close to the ruler cutting, when we are cutting, to brush some kerosene on the cutting edge in advance, so that the cutting edge is easy to pull off after oil seepage.
3. Cutting large glass 5-6mm thick with glass knife: Cutting large glass 5-6mm thick is the same as cutting with 5mm*40mm ruler, but large glass area is large, people can not cut on the ground, sometimes need to stand on the glass to cut, before cutting, must be lined with velvet cloth on the worktable, so that the glass is evenly pressed, after cutting, both hands grasp the required glass, and at the same time take off the downward board, can not be careless. Meaning, causing the whole glass to break.
By the way, We manufacture antique mirror glass with the thickness from 3mm to 8mm. The attention of cutting antique mirror glass is the same as the normal flat glass.
4. Cutting Wired glass with glass knife: The method of cutting clamp glass is the same as that of 5-6 mm flat glass, but the cutting surface of the clamp glass is uneven, and the cutting edge is easy to slip and difficult to grasp. Therefore, it is necessary to recognize the knife edge, hold the knife head firmly, exert more force than ordinary glass, and speed faster, so that the bending will not occur. After cutting, both hands grasp the glass and pull down forcefully. The clamp wire can be pulled off. Then the clamp wire can be cut down with pliers to avoid cutting the palm when carrying.
5. Cutting pattern glass with glass knife: Cutting pattern glass with glass knife, pattern glass surface should be downward, and cutting method is the same as that of filament glass.
6. Cutting Frosted Glass with Glass Knife: Cutting Frosted Glass with Glass Knife, the surface should be downward, and the cutting method is the same as that of flat glass.
Welcome to enquire Allen@antiquemirror.cn Cell:0086-13750360233(Whatsapp&Wechat) ,
We manufacture and supply antique mirror glass,colored mirror ,pattern glass,silver mirror, copper-free mirror.