Wash basin mirror installation should note: installation height, fixed methods, mercury surface protection.
Installation height of bathroom mirror: under the bathroom mirror, it is about 135 centimeters from the ground (or the center of the mirror is about 160 to 165 centimeters from the ground).
Two, bathroom mirror is fixed method: measure the hook distance behind the mirror first, make a mark on metope again next, hit an eye in mark place. If it is a tile wall, the tile should be first drilled with a glass drill bit, then 3CM with a percussion drill or electric hammer. After the hole is made, the plastic expansion pipe should be put into the hole. Then the 3CM self-tapping screw should be twisted, leaving 0.5cm on the outside, and then the mirror should be hung. Pay attention to the protection of the wall, the choice of the tile joint punching.
3. Protection of mercury surface: if you use glass glue to fix the mirror, be careful not to use acid glass glue, and choose neutral glue (acid glass glue will usually damage the mercury on the back of the mirror, resulting in mottle of the mirror).
4, bathroom mirror lens lamp is installed: bathroom lens should have good lamplight to cooperate commonly, because this lens headlamp or the lamp of mirror flank are very necessary. When installing mirror headlamp, want to pay attention to prevent to produce dazzle light, the proposal installs chimney, or the lamps and lanterns that chooses ground glass surface.
What problem does bathroom mirror install need to notice? How to install it?
The following problems should be noted for bathroom mirror installation:
1. The first thing to consider is the anti-fogging mirror. Since there is heat in the bath, you must buy a good anti-fogging mirror.
2. Stay far away from the shower or the back of the bathtub. Take safety into consideration and give people sufficient bath activity space.
3, mirror does not face the door of toilet or window, had better be face to the wall, the protection to individual privacy. Also from geomantic study consideration.
4. The mirror can consider installing the lamp belt or t4 lamp tube behind, which is more warm and romantic.
Installation: when installing, you can use expansion bolts. Pay attention to the variety of ceramic tiles when drilling holes. If it is all-ceramic, you should use a water drill, bit by bit, or it will crack easily. If using glass glue to fix, do not use acid glass glue, should choose neutral glue, acid glass glue will usually react with the material on the back of the mirror, resulting in the mottle of the mirror surface. Before applying the adhesive, it is best to do a solubility test to see if the adhesive dissolves with the material.
Article by Allen (allen@antiquemirror.cn) sales representative works for antique mirror manufacturer.